Current Ratio: Why 1.33 Matters in Working Capital Assessment



The current ratio is current assets divided by current liabilities. It tells a bank whether a business has enough short-term assets (stock, debtors, cash) to cover what it owes in the next twelve months. Banks still quote 1.33 as the benchmark because it is the minimum that falls out of the Tandon Committee's second method of lending: the borrower funds at least 25% of current assets from long-term money, and the bank and creditors fund the rest.

It is a benchmark, not a law. Each bank sets its own minimum in its credit policy. But if you understand where 1.33 comes from, you understand most of what a credit manager is checking when they look at liquidity.

Current Ratio: Why 1.33 Matters in Working Capital Assessment

The formula

Current ratio = Current assets ÷ Current liabilities

A ratio of 1.50 means the business has Rs 1.50 of current assets for every Rs 1 it must pay within a year. A ratio below 1 means current liabilities are larger than current assets, so some short-term money is funding long-term assets.

The formula is simple. The arguments are about what goes into each side.

What banks count as current assets and liabilities

Banks don't take the balance sheet groupings as they are. They classify items the way the CMA data format does, and that often moves the ratio.

Current assets usually include:

  • Raw material, work in progress, finished goods and stores (excluding slow-moving or obsolete stock)
  • Trade debtors, generally those outstanding for six months or less; older debtors are shown as non-current
  • Cash and bank balances
  • Advances to suppliers for regular purchases, and other genuine short-term receivables

What banks move out of current assets:

  • Loans and advances to group companies, directors or partners
  • Investments, unless they are short-term and readily realisable
  • Deposits such as security deposits that will not turn into cash in the normal cycle
  • Debtors and stock that are doubtful or dead

Current liabilities include:

  • Bank borrowings for working capital: cash credit, overdraft, bill discounting, packing credit
  • Trade creditors and bills payable
  • Advances from customers
  • Statutory dues, provisions and other short-term liabilities
  • Term loan instalments due within the next twelve months, which many balance sheets hide inside long-term borrowings

That last point catches many borrowers. Moving one year's instalments into current liabilities can pull a ratio from 1.35 to below 1.25 on its own.

Why 1.33: the arithmetic behind the number

Working capital finance is meant to fund current assets, but not all of them. The borrower is expected to have a stake, called the margin or net working capital (NWC) :

Net working capital = Current assets − Current liabilities

Under the Tandon Committee's Method II, the borrower must fund at least 25% of total current assets from long-term sources (capital, reserves, long-term loans). The remaining 75% can come from current liabilities: the bank's working capital limit plus creditors and other current liabilities.

Take current assets of Rs 400 lakh:

  • Borrower's minimum contribution (NWC) = 25% × 400 = Rs 100 lakh
  • Maximum current liabilities = 400 − 100 = Rs 300 lakh
  • Current ratio = 400 ÷ 300 = 1.33

Whatever the size of the business, if current liabilities are capped at 75% of current assets, the ratio works out to 1 ÷ 0.75 = 1.33. That is the whole origin of the number.

 

RBI has since withdrawn the MPBF prescription and left banks free to decide how they assess working capital and what minimum current ratio they accept. In practice, many banks still use 1.33 as the reference for larger working capital limits, accept lower levels in some sectors or under the turnover method for smaller limits, and record a justification whenever a proposal falls below their benchmark.

A worked example

A typical case: a manufacturer submits projections for next year and asks for a cash credit limit of Rs 450 lakh. Projected figures (Rs lakh):

Item Rs lakh
Stock (raw material, WIP, finished goods) 350
Debtors (under six months) 380
Cash, bank and other current assets 70
Total current assets 800
Creditors and other current liabilities 200
Cash credit requested 450
Total current liabilities 650

Step 1: Current ratio = 800 ÷ 650 = 1.23

Step 2: Net working capital = 800 − 650 = Rs 150 lakh

Step 3: What 1.33 needs. The borrower should bring 25% of current assets, that is 25% × 800 = Rs 200 lakh. The shortfall is 200 − 150 = Rs 50 lakh.

This is exactly the Method II limit: 75% × 800 − 200 = Rs 400 lakh. The request is Rs 50 lakh higher than the business's own margin supports.

Step 4: the options a credit manager will discuss.

  1. Sanction Rs 400 lakh instead of Rs 450 lakh. Current liabilities become 600 and the ratio is 800 ÷ 600 = 1.33. The business has to run with less bank money, or find it elsewhere.
  2. Promoters bring Rs 50 lakh of long-term money (fresh capital, or unsecured loans subordinated to the bank) and use it in the business instead of the extra cash credit. NWC rises to Rs 200 lakh, the cash credit stays at Rs 400 lakh, and the ratio is again 1.33.
  3. Fund part of the gap with a working capital term loan. Suppose Rs 50 lakh is given as a five-year term loan, with Rs 10 lakh due in the coming year. Only that Rs 10 lakh is a current liability. Current liabilities = 200 + 400 + 10 = 610, so the ratio is 800 ÷ 610 = 1.31 and it improves each year as the term loan is repaid from profits.
  4. Accept 1.23 with a reason on record, for example a trading business with fast-moving stock and steady cash flows, if the bank's policy allows it. Many banks permit this with sanctioning authority approval, often with tighter monitoring.

Reading the ratio: low, high and the trend

Below 1 is the warning sign banks take most seriously. It usually means short-term borrowings or creditors have gone into fixed assets, group companies or losses. This is called diversion of working capital and the credit manager will ask where the money went before discussing any new limit.

Between 1 and 1.33 is common in practice, especially in trading, distribution and seasonal businesses. It is not an automatic rejection, but the bank will look at cash flows, DSCR, security and conduct of the account before accepting it.

Very high (say above 2.5) is not automatically good. It can mean stock that is not moving, debtors that are not paying, or cash sitting idle. A credit manager will check the holding periods: if debtor days and stock days are rising, a high current ratio may be hiding a collection problem.

The trend matters as much as the level. A ratio moving from 1.15 to 1.30 over three years, as profits are retained, reads better than one sliding from 1.50 to 1.25.

Quick ratio: the stricter check

Because stock is the hardest current asset to turn into cash, banks also look at the quick ratio (also called the acid-test ratio):

Quick ratio = (Current assets − Inventory) ÷ Current liabilities

In the example, after the limit is set at Rs 400 lakh: (800 − 350) ÷ 600 = 0.75 . For a manufacturer with heavy stock, that is not unusual. What matters is whether it is stable and whether debtors are genuine and collectable.

Year-end window dressing

The current ratio is easy to improve on the balance sheet date. If a business with current assets of Rs 500 lakh and current liabilities of Rs 400 lakh (ratio 1.25) uses Rs 100 lakh of cash to pay creditors on 31 March, the ratio becomes 400 ÷ 300 = 1.33. Nothing about the business has changed.

 

Credit managers know this. They compare the year-end figures with monthly stock statements, the cash credit account's utilisation through the year and creditor balances shortly after the year-end. A ratio that looks good only on one date is not given much weight.

How a business can improve its current ratio

  • Retain profits instead of withdrawing them. Every rupee kept in the business adds to net working capital.
  • Bring long-term money for long-term assets. Fund machinery and premises with a term loan or capital, not with cash credit or creditors.
  • Recover loans given to group companies or directors, and use the money in the business.
  • Subordinate promoters' unsecured loans so they are treated as long-term funds.
  • Show term loan instalments correctly and plan repayments so the current portion is not a surprise.
  • Clean up old debtors and dead stock. It may lower the ratio once, but banks trust the figures more.

The current ratio is read together with TOL/TNW for leverage and DSCR for repayment capacity. If you are preparing CMA data, the current ratio in Form IV and the net working capital in Form V should tell the same story as the limit you are asking for.

Frequently asked questions

Is a current ratio of 1.33 mandatory for a bank loan?

No. It comes from the Tandon Committee's Method II, and RBI has left banks free to set their own minimum. Many banks still use it as a benchmark and need a recorded justification for lower levels.

What is a good current ratio for a small business?

Between about 1.25 and 2 is usually comfortable, depending on the sector. Trading businesses often run lower; manufacturers with long production cycles usually need more.

Does cash credit count as a current liability?

Yes. Working capital borrowings from banks are current liabilities, even though the limit is renewed every year. That is why a bigger cash credit limit lowers the current ratio.

 

How is the current ratio different from net working capital?

The current ratio is a proportion; net working capital is the rupee amount by which current assets exceed current liabilities. Banks look at both: the ratio for comfort, and the NWC to see how much of the margin the borrower is actually funding.

Sources


Daily Limit Reached

You have reached your daily limit of 2 Free Articles

Subscribe to CCI PRO for unlimited access

Why Upgrade to CCI PRO?
  • No Ads
  • WhatsApp Community
  • Daily E-Newsletter
  • Unlimited Articles Access
  • Profile Visitors
  • Link Social Profiles
  • Featured Job Posts
  • Pro Badge
  • Expert GST Guidance
  • Unlimited Forum Replies
  • Download Content in PDF
1 Year PLAN
1999
(Excl. of GST ₹359)

2 Years PLAN
3499
(Excl. of GST ₹629)

BEST VALUE
3 Years PLAN
4999
(Excl. of GST ₹899)

View all CCI PRO benefits

Already a PRO member? Login here for an ad-free experience. 07941056694


Comments :

Recent Articles


More »


Popular Articles





CCI Pro

CCI Articles

submit article


Company
Featured 27 October 2026
semi-qualified CA

Saini Pati Shah & Co LLP, Chartered Accountants

Mumbai

CA Final

View Details
Company
ARTICLESHIP 17 November 2026
Vacancy for Articleship

Promptitude Accounting Services Private limited

Bengaluru

B.Com

View Details
Company
16 November 2026
Assistant Article

ZAK & Co. Chartered Accountants

Bengaluru

CA Inter

View Details
Company
10 November 2026
FP&A Executive

Gujarat Guardian

Ankleshwar

CA Final

View Details
Company
Featured ARTICLESHIP 28 October 2026
CA- Inter and Articles

N N V Satish & Co.,

Hyderabad

CA Inter

View Details
Company
02 November 2026
Audit Executive

SRJP & Co LLP

Kochi

CA Inter

View Details
Company
ARTICLESHIP 25 October 2026
Article Intern (CA Articleship)

Arpan Bohra & Co

Hyderabad

CA Inter

View Details
Company
ARTICLESHIP 14 November 2026
Article Assistant

Jitendra Agarwal & Associates

Bengaluru

CA Inter

View Details