EASYOFFICE
EASYOFFICE

AS 10: Property, Plant and Equipment: An analysis

Tanuj Chandra Saxenaa , Last updated: 17 December 2021  
  Share


AS 10 is to be applied in accounting for property, P&E (Plant and Equipment) and this standard are not applicable to:

(a) Biological Assets which are related to agricultural activities except for bearer plants. The Standard is applicable to bearer plants, however, it doesn’t apply to the produce on bearer plants; and

(b) Wasting Assets which include mineral rights, expenses related to exploration for and extraction of oil, minerals, natural gas and other non-regenerative resources.

Recognition of Asset under AS 10 Property, Plant and Equipment

The cost of property and P&E should be recognized as an asset only if:-

  • it is apparent that the future economic benefits related to such asset would flow to the business; and
  • the cost of such asset could be reliably measured.
A brief analysis on - AS 10: Property, Plant and Equipment

Measurement of cost of the asset

An enterprise can select the revaluation model or the cost model as the accounting policy and employ the same to the entire class of its properties and Plant & Equipments.

According to the cost model approach, after recognizing the asset as an item of property or plant and equipment, it should be carried at the cost less the accumulated depreciation and the accumulated impairment losses (if any).

As per the revaluation model, once the asset is recognized and its fair value could be measured reliably, then it must be carried at the revalued amount, which is the fair value of such asset at the date of the revaluation as reduced any following accumulated depreciation and accumulated impairment losses (if any).

Revaluations must be done at regular intervals for ensuring that the carrying amount doesn’t differ much from that which would be determined using the fair value at the balance sheet date.

Depreciation under AS 10 Property, Plant and Equipment

As per the standard, depreciation charge for every period must be recognized in the P/L Statement unless it’s included in carrying the amount of any other asset. The depreciable amount of any asset should be allocated on a methodical basis over the useful life of the asset.

Every part of property or P&E (Plant and Equipment) whose cost is substantial with respect to the overall cost of the item must be depreciated separately.

The standard also prescribes, that the residual value and useful life of an asset must be reviewed at the end of each financial year and, in case the expectations vary from the previous estimates, Changes must be accounted for as changes in accounting estimate as per Accounting Standard 5 – Net Profit or Loss for the Period, Prior Period Items and Changes in Accounting Policies.

The method of depreciation employed must reflect the pattern of future economic benefits of the asset consumed by an enterprise. Various depreciation methods could be used for allocating the depreciable amount of an asset on a methodical basis over the useful life of the asset. The methods include SLM (Straight-line Method), diminishing balance method, or units of production method.

 

Major Differences Between AS 10 and Ind AS 16

Ind AS 16 Property, Plant, and Equipment deal with accounting for fixed assets which are covered by AS 10.

This Ind AS also deals with the depreciation of property, plant, and equipment covered by AS

The key differences between the existing AS 10 and Ind AS 10 are mentioned below

 

Particulars

Ind AS 16

AS 10

Accounting for real estate

Ind AS 16 doesn’t exclude real estate developers

AS 10 explicitly excludes from its scope the accounting for real estate developers

Capitalization of Inspections costs

Ind AS 16 necessitates capitalization of major inspections cost with consequent de-recognition of any residual carrying the amount of cost of the prior inspection

AS 10 doesn’t deal with such aspect

Self-constructed assets

Ind AS 16 with respect to self-constructed assets, explicitly state that unusual amounts of labor, wasted material or other resources employed in constructing any asset aren’t included in asset’s cost

AS 10 doesn’t mention the same

Joint Ownership

AS 10 deals specifically with fixed assets which are jointly owned with others

Ind AS 16 doesn’t deal specifically with this as these are covered in Ind AS 31

Assets Held for Sale and Fixed Assets retired from Active Use

Ind AS 16 doesn’t deal with assets held for sale as the accounting treatment is defined in Ind AS 105, Non-current Assets Held for Sale and Discontinued Operations.

AS 10 deals with accounting for assets held for sale and items of fixed assets retired from active use

ICDS 5 Vs AS 10

The concept of Materiality for treating an item as the expense is recognized by AS isn't permissible under ICDS

ICDS 5 particularly excludes Other Taxes that are consequently recoverable from the cost of an acquired tangible fixed asset

For assets acquired in exchange for other assets, the actual cost is recognized under ICDS 5,

Where AS 10 permits determining the cost base on FMV (Fair Market Value) of the asset acquired or given up whichever is apt. AS 10 suggest recording the cost at the NBV (Net Book Value) of asset given up

For assets acquired in exchange for shares or Securities, the actual cost of the asset is recognized as per ICDS 5.

Where AS 10 permits determining the cost base on FMV (Fair Market Value) of the asset acquired or share or securities given up whichever is apt

Treatment for an expenditure that doesn’t increase the future benefits is not defined in ICDS.

However, according to Accounting Standard 10, such expenditure should be treated as an expenditure and recognized in the Profit and Loss Statement Accordingly.

ICDS has more disclosure requirements including grant or subsidy received on account of a tangible fixed asset, changes in the rate of exchange of currency, etc

Join CCI Pro

Published by

Tanuj Chandra Saxenaa
(Company Secretary)
Category Accounts   Report

3 Likes   5752 Views

Comments


Related Articles


Loading