LIVE GST Certification Course by CA Arun Chhajer begins 27th April. Register Now!!

Tally 9 data migration problem

NANDURI RAVI SURYA NARAYANA MU (ACCOUNTANT) (194 Points)

27 January 2009

I migrated tally 6.3 data into tally 7.2, i received a message your data migration is completed. Then i i opened tally 9 gateway. The migrated company exit but i cannot see any ledger and vouchers. What was wrong done by me during the course of mirgated data. So please guide me, how i can fully view of my 6.3 data in tally 9, solution will be highly appreciated.

Regards

Ravi

Reply
Follow
Share

12 Replies

CA. Dashrath Maheshwari (TaXpert) (15090 Points)
Replied 27 January 2009

You said that you have migrated tally 6.3 data into tally 7.2 !!!

Then how can you view the data in Tally 9,

You should migrate the 7.2 data in 9 version

NANDURI RAVI SURYA NARAYANA MU (ACCOUNTANT) (194 Points)
Replied 27 January 2009

Mr. Maheswari, for your information, the Data migration process done in the Tally 9 prescribed software. Being that the data does support the tally 6.3 data. So in this corner can you give any advise.

CA. Dashrath Maheshwari (TaXpert) (15090 Points)
Replied 27 January 2009

If you have the 6.3 to 7.2 converter then plz convert first from that software, then take a backup of resulted data.

Now convert the resulted data (tally 7.2 data) by utility provided in tally9.

I think this step -by- step mehtod will pursue your objective.

**DM

NANDURI RAVI SURYA NARAYANA MU (ACCOUNTANT) (194 Points)
Replied 27 January 2009

Originally posted by :Dashrath Maheshwari
"	If you have the 6.3 to 7.2 converter then plz convert first from that software, then take a backup of resulted data. Now convert the resulted data (tally 7.2 data) by utility provided in tally9. I think this step -by- step mehtod will pursue your objective. **DM	"

Mr. Maheswari thanks for your moral support, i will keep in touch with, once again i will try my extreem level best

Regards

Ravi

achal agarwal (Tally Authorised Partner) (177 Points)
Replied 08 February 2009

sir, as you mentioned you have converted the data from 6.3 to 7.2 . but before using the data in tally 9 you need to migrate it to tally 9 . Please Follow Below Procedure.

procedure for converting tally 7.2 Data to Tally 9

OPen Tally9 Folder . - Double Click on "tally72migration.exe"

Select Migrate Data.

Press "BackSpace" to change the data directory.

Type the Path to data Directory of Tally 7.2 Data.

Press Enter

You will get List of Tally 7.2 Companies .

Select Each Company One By One TO Migrate.

Upon Migrating All the Companies. Copy the data tally 9 data folder to open.

PS: PLEASE TAKE BACKUP OF DATA BEFORE DOING ANY OF THIS.

ACHAL-9892622992,

Kariku Kariku (Tally User) (24 Points)
Replied 18 February 2009

1) The following Migration Error is coming while using migration from 7.2 to 9:

[2009-02-18 11:03:29] Failed to Post to: https://127.0.0.1:9090

2) The following details are in the migration file when using the migration tool:

======

[2009-02-18 11:02:21] *********************************************************
[2009-02-18 11:02:21] Migration start at 11:02:21
[2009-02-18 11:02:21] Initializing company data...
[2009-02-18 11:02:21] Migrating Company (Batch: 1)...
[2009-02-18 11:02:21] Migrated: 0
[2009-02-18 11:02:21] Altered: 1
[2009-02-18 11:02:21] Migrating Company (Batch: 2)...
[2009-02-18 11:02:21] Done
[2009-02-18 11:02:21] Migrating Units (Batch: 1)...
[2009-02-18 11:02:21] Migrated: 1
[2009-02-18 11:02:21] Migrating Units (Batch: 2)...
[2009-02-18 11:02:21] Done
[2009-02-18 11:02:21] Migrating Currency (Batch: 1)...
[2009-02-18 11:02:21] Migrated: 0
[2009-02-18 11:02:21] Altered: 2
[2009-02-18 11:02:21] Migrating Currency (Batch: 2)...
[2009-02-18 11:02:21] Done
[2009-02-18 11:02:21] Migrating Statutory Masters (Batch: 1)...
[2009-02-18 11:02:23] Migrated: 50
[2009-02-18 11:02:23] Migrating Statutory Masters (Batch: 2)...
[2009-02-18 11:02:26] Migrated: 50
[2009-02-18 11:02:26] Migrating Statutory Masters (Batch: 3)...
[2009-02-18 11:02:32] Migrated: 50
[2009-02-18 11:02:32] Migrating Statutory Masters (Batch: 4)...
[2009-02-18 11:02:42] Migrated: 50
[2009-02-18 11:02:42] Migrating Statutory Masters (Batch: 5)...
[2009-02-18 11:02:55] Migrated: 50
[2009-02-18 11:02:55] Migrating Statutory Masters (Batch: 6)...
[2009-02-18 11:03:06] Migrated: 50
[2009-02-18 11:03:06] Migrating Statutory Masters (Batch: 7)...
[2009-02-18 11:03:14] Migrated: 35
[2009-02-18 11:03:14] Migrating Statutory Masters (Batch: 8)...
[2009-02-18 11:03:14] Done
[2009-02-18 11:03:14] Migrating Groups (Batch: 1)...
[2009-02-18 11:03:18] Migrated: 1
[2009-02-18 11:03:18] Altered: 28
[2009-02-18 11:03:18] Migrating Groups (Batch: 2)...
[2009-02-18 11:03:19] Done
[2009-02-18 11:03:19] Migrating Ledgers (Batch: 1)...
[2009-02-18 11:03:19] Migrated: 3
[2009-02-18 11:03:19] Altered: 2
[2009-02-18 11:03:19] Migrating Ledgers (Batch: 2)...
[2009-02-18 11:03:19] Done
[2009-02-18 11:03:19] Migrating Stock Groups (Batch: 1)...
[2009-02-18 11:03:19] Done
[2009-02-18 11:03:19] Migrating Stock Categories (Batch: 1)...
[2009-02-18 11:03:19] Done
[2009-02-18 11:03:19] Migrating Cost Categories (Batch: 1)...
[2009-02-18 11:03:20] Migrated: 0
[2009-02-18 11:03:20] Altered: 1
[2009-02-18 11:03:20] Migrating Cost Categories (Batch: 2)...
[2009-02-18 11:03:20] Done
[2009-02-18 11:03:20] Migrating Cost Centers (Batch: 1)...
[2009-02-18 11:03:20] Done
[2009-02-18 11:03:20] Migrating Attendance Types (Batch: 1)...
[2009-02-18 11:03:20] Done
[2009-02-18 11:03:20] Migrating Employees (Batch: 1)...
[2009-02-18 11:03:20] Done
[2009-02-18 11:03:20] Migrating Godowns (Batch: 1)...
[2009-02-18 11:03:20] Migrated: 0
[2009-02-18 11:03:20] Altered: 1
[2009-02-18 11:03:20] Migrating Godowns (Batch: 2)...
[2009-02-18 11:03:20] Done
[2009-02-18 11:03:20] Migrating Stock Items (Batch: 1)...
[2009-02-18 11:03:20] Done
[2009-02-18 11:03:20] Migrating Voucher Types (Batch: 1)...
[2009-02-18 11:03:23] Migrated: 0
[2009-02-18 11:03:23] Altered: 23
[2009-02-18 11:03:23] Migrating Voucher Types (Batch: 2)...
[2009-02-18 11:03:23] Done
[2009-02-18 11:03:23] Migrating Client Rules (Batch: 1)...
[2009-02-18 11:03:23] Done
[2009-02-18 11:03:23] Migrating Server Rules (Batch: 1)...
[2009-02-18 11:03:23] Done
[2009-02-18 11:03:23] Migrating Budgets (Batch: 1)...
[2009-02-18 11:03:23] Done
[2009-02-18 11:03:23] Migrating Transactions (Batch: 1)...
[2009-02-18 11:03:29] Failed to Post to: https://127.0.0.1:9090
[2009-02-18 11:03:29] Migration ended at 11:03:29
[2009-02-18 11:03:29]

=====================

3) Tally.ini looks like:;; Tally 9 workstation specific parameters file

==========

[Tally]

;; ** The following line is required for TallyConnected

TallyLicense = Connect
;; ** If you are running multi-user in client mode use TallyLicenseServer
;;TallyLicenseServer = server:port

;; Specify the TallyLock specifications: use TallyLock = NONE for educational

TallyLock = NONE

TallyLockServer = No

;; Specify location of Data files

Data = E:\Tally\Data

;; Specify list of companies to preload
;; ** TO STOP DEFAULT LOADING set the following line to NO

Default Companies = Yes

Load = 10000

;; Specify list of TDL files for user defined reports and changes
;; ** TO STOP LOADING TDL FILES, set the following line to NO

User TDL = Yes

;;tdl = <tdlfile.1>
;;tdl = <tdlfile.2>

;; Specify location of TALLY.SAV (saved configuration of Tally)

Config = E:\Tally

;; Specify location of Language Files

LangPath = E:\Tally\Lang

;; Specify Color details of local monitor

Color = Yes

;; end-of-file

=====================================

4) No antivirus is running. Only windows firewall is present.

Please help

achal agarwal (Tally Authorised Partner) (177 Points)
Replied 19 February 2009

This Problem Occurs When Your COmputer Is Low On Resources. (Ps If Data Volume Is High Min Requirment Is Pentium 4 With 1 gb RAM. )

Also Check if you are using a license copy of tally or a pirated one . pirated copy usually gives this error while migrating

Is computer Has Low Memory -

Disable the Firewall.

Close All Unwanted utiliteis from task bar. this will free up the memory

Secondly keep the Computer Idle While Migrating the Data i.e, do not run any applications while migrating data.

if computer is on lan system , disconnect the Lan and then Migrate.

Still If the Prolem Prevails - Please Upgrade your COmputer.

Rgds

Achal

9892622992,

Originally posted by :Kariku Kariku

1) The following Migration Error is coming while using migration from 7.2 to 9:
[2009-02-18 11:03:29] Failed to Post to: https://127.0.0.1:9090
2) The following details are in the migration file when using the migration tool:
======
[2009-02-18 11:02:21] *********************************************************
[2009-02-18 11:02:21] Migration start at 11:02:21
[2009-02-18 11:02:21] Initializing company data...
[2009-02-18 11:02:21] Migrating Company (Batch: 1)...
[2009-02-18 11:02:21] Migrated: 0
[2009-02-18 11:02:21] Altered: 1
[2009-02-18 11:02:21] Migrating Company (Batch: 2)...
[2009-02-18 11:02:21] Done
[2009-02-18 11:02:21] Migrating Units (Batch: 1)...
[2009-02-18 11:02:21] Migrated: 1
[2009-02-18 11:02:21] Migrating Units (Batch: 2)...
[2009-02-18 11:02:21] Done
[2009-02-18 11:02:21] Migrating Currency (Batch: 1)...
[2009-02-18 11:02:21] Migrated: 0
[2009-02-18 11:02:21] Altered: 2
[2009-02-18 11:02:21] Migrating Currency (Batch: 2)...
[2009-02-18 11:02:21] Done
[2009-02-18 11:02:21] Migrating Statutory Masters (Batch: 1)...
[2009-02-18 11:02:23] Migrated: 50
[2009-02-18 11:02:23] Migrating Statutory Masters (Batch: 2)...
[2009-02-18 11:02:26] Migrated: 50
[2009-02-18 11:02:26] Migrating Statutory Masters (Batch: 3)...
[2009-02-18 11:02:32] Migrated: 50
[2009-02-18 11:02:32] Migrating Statutory Masters (Batch: 4)...
[2009-02-18 11:02:42] Migrated: 50
[2009-02-18 11:02:42] Migrating Statutory Masters (Batch: 5)...
[2009-02-18 11:02:55] Migrated: 50
[2009-02-18 11:02:55] Migrating Statutory Masters (Batch: 6)...
[2009-02-18 11:03:06] Migrated: 50
[2009-02-18 11:03:06] Migrating Statutory Masters (Batch: 7)...
[2009-02-18 11:03:14] Migrated: 35
[2009-02-18 11:03:14] Migrating Statutory Masters (Batch: 8)...
[2009-02-18 11:03:14] Done
[2009-02-18 11:03:14] Migrating Groups (Batch: 1)...
[2009-02-18 11:03:18] Migrated: 1
[2009-02-18 11:03:18] Altered: 28
[2009-02-18 11:03:18] Migrating Groups (Batch: 2)...
[2009-02-18 11:03:19] Done
[2009-02-18 11:03:19] Migrating Ledgers (Batch: 1)...
[2009-02-18 11:03:19] Migrated: 3
[2009-02-18 11:03:19] Altered: 2
[2009-02-18 11:03:19] Migrating Ledgers (Batch: 2)...
[2009-02-18 11:03:19] Done
[2009-02-18 11:03:19] Migrating Stock Groups (Batch: 1)...
[2009-02-18 11:03:19] Done
[2009-02-18 11:03:19] Migrating Stock Categories (Batch: 1)...
[2009-02-18 11:03:19] Done
[2009-02-18 11:03:19] Migrating Cost Categories (Batch: 1)...
[2009-02-18 11:03:20] Migrated: 0
[2009-02-18 11:03:20] Altered: 1
[2009-02-18 11:03:20] Migrating Cost Categories (Batch: 2)...
[2009-02-18 11:03:20] Done
[2009-02-18 11:03:20] Migrating Cost Centers (Batch: 1)...
[2009-02-18 11:03:20] Done
[2009-02-18 11:03:20] Migrating Attendance Types (Batch: 1)...
[2009-02-18 11:03:20] Done
[2009-02-18 11:03:20] Migrating Employees (Batch: 1)...
[2009-02-18 11:03:20] Done
[2009-02-18 11:03:20] Migrating Godowns (Batch: 1)...
[2009-02-18 11:03:20] Migrated: 0
[2009-02-18 11:03:20] Altered: 1
[2009-02-18 11:03:20] Migrating Godowns (Batch: 2)...
[2009-02-18 11:03:20] Done
[2009-02-18 11:03:20] Migrating Stock Items (Batch: 1)...
[2009-02-18 11:03:20] Done
[2009-02-18 11:03:20] Migrating Voucher Types (Batch: 1)...
[2009-02-18 11:03:23] Migrated: 0
[2009-02-18 11:03:23] Altered: 23
[2009-02-18 11:03:23] Migrating Voucher Types (Batch: 2)...
[2009-02-18 11:03:23] Done
[2009-02-18 11:03:23] Migrating Client Rules (Batch: 1)...
[2009-02-18 11:03:23] Done
[2009-02-18 11:03:23] Migrating Server Rules (Batch: 1)...
[2009-02-18 11:03:23] Done
[2009-02-18 11:03:23] Migrating Budgets (Batch: 1)...
[2009-02-18 11:03:23] Done
[2009-02-18 11:03:23] Migrating Transactions (Batch: 1)...
[2009-02-18 11:03:29] Failed to Post to: https://127.0.0.1:9090
[2009-02-18 11:03:29] Migration ended at 11:03:29
[2009-02-18 11:03:29]
=====================
3) Tally.ini looks like:;; Tally 9 workstation specific parameters file
==========
[Tally]

    ;; ** The following line is required for TallyConnected
TallyLicense = Connect
    ;; ** If you are running multi-user in client mode use TallyLicenseServer
;;TallyLicenseServer = server:port
    ;; Specify the TallyLock specifications: use TallyLock = NONE for educational
TallyLock = NONE
TallyLockServer = No
    ;; Specify location of Data files
Data = E:\Tally\Data
    ;; Specify list of companies to preload
    ;; ** TO STOP DEFAULT LOADING set the following line to NO
Default Companies = Yes
Load = 10000
    ;; Specify list of TDL files for user defined reports and changes
    ;; ** TO STOP LOADING TDL FILES, set the following line to NO
User TDL = Yes
;;tdl =
;;tdl =
    ;; Specify location of TALLY.SAV (saved configuration of Tally)
Config = E:\Tally
    ;; Specify location of Language Files
LangPath = E:\Tally\Lang
    ;; Specify Color details of local monitor
Color   = Yes
    ;; end-of-file
=====================================
4) No antivirus is running. Only windows firewall is present.
Please help

subramanya (Professional) (907 Points)
Replied 23 February 2009

Originally posted by :NANDURI RAVI SURYA NARAYANA MU
"	I migrated tally 6.3 data into tally 7.2, i received a message your data migration is completed. Then i i opened tally 9 gateway. The migrated company exit but i cannot see any ledger and vouchers. What was wrong done by me during the course of mirgated data. So please guide me, how i can fully view of my 6.3 data in tally 9, solution will be highly appreciated. Regards Ravi	"